Passat (B3)
| Removing and installing brake pedal/brake servo |
Caution
|
Note| Grease all bearing points with grease -G 000 602- before installing. |
| 1 - | Retaining clip |
| q | Ensure secure seating. |
| 2 - | Pin |
| 3 - | Push rod with brake servo forked head |
| 4 - | Self-locking hexagon nut, 20 Nm |
| 5 - | Brake pedal pivot pin |
| 6 - | Return spring for brake pedal |
| 7 - | Mounting tube for return spring |
| 8 - | Mounting bush for brake pedal |
| 9 - | Brake pedal |
| 10 - | Clutch pedal |
| q | Removing and installing → Manual gearbox; Rep. Gr.30. |
| 11 - | Mounting bracket for brake pedal cluster |
| 12 - | Pivot pin for clutch pedal |
| 13 - | Mounting bush for clutch pedal |
| 14 - | Pivot pin for over-centre spring |
| 15 - | Over-centre spring |
| q | Remove before removing clutch pedal → Manual gearbox; Rep. Gr.30. |
| 16 - | Retaining clip |
| q | Ensure secure seating. |
| 17 - | Brake light switch |
| q | Adjusting → Chapter. |