Volkswagen Workshop Service and Repair Manuals > Passat (B3) > Running gear | Steering | Repairing power steering | Removing and installing track rod (TRW and ZF power steering box)

Installing

–	If necessary adjust new track rod to length → Chapter.

–	Coat tapped hole thread with D6 locking fluid -arrow-.

Note

Apply one drop only in 2nd thread of rack. If too much D6 is used the release torque when next dismantling will be too high. No D6 must get onto steering rack.

–	Tighten track rod to specified torque; 70 Nm. Always use a torque wrench.

Running gear
Steering
Repairing power steering / moving_and_installing_track_rod_(trw_and_zf_power_steering_box)/">Removing and installing track rod (TRW and ZF power steering box)
Installing

Installing boot > < Removing

Volkswagen Workshop Service and Repair Manuals

Passat (B3)

Running gear Steering Repairing power steering / moving_and_installing_track_rod_(trw_and_zf_power_steering_box)/">Removing and installing track rod (TRW and ZF power steering box) Installing

Running gear Steering Repairing power steering / moving_and_installing_track_rod_(trw_and_zf_power_steering_box)/">Removing and installing track rod (TRW and ZF power steering box) Installing

Running gear
Steering
Repairing power steering / moving_and_installing_track_rod_(trw_and_zf_power_steering_box)/">Removing and installing track rod (TRW and ZF power steering box)
Installing

Running gear
Steering
Repairing power steering / moving_and_installing_track_rod_(trw_and_zf_power_steering_box)/">Removing and installing track rod (TRW and ZF power steering box)
Installing