Passat Sedan V6-3.6L (BLV) (2008)
Install outer brake pad on brake carrier.
Insert inner brake pad with retaining spring in brake caliper (piston).
Tighten brake caliper to brake carrier using both guide pins.
Install both protective caps.
Install retaining spring in brake caliper.
Connect brake pad wear indicator connector.
‹› After replacing brake pads, depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly seated in their
normal operating position.
‹› Check brake fluid level after replacing brake pad.
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1331)
‹› Brake Pedal Actuator (V.A.G 1869/2)