Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Sealing Flange, Engine Front <--> [Front Engine Plate] > Component Information > Service and Repair > Page 1936

Page 2
background image

-

Apply a bead of sealant (D 176 501 A1) approximately 2 to 3 mm as shown - arrows - on the clean sealing flange sealing surface.

‹› Cover the seal with a clean cloth before applying the sealant bead.

‹› The sealant bead must not be thicker than 2 to 3 mm or the excess sealant could enter the oil pan and clog the oil suction pipe strainer.

‹› Note the expiration date of the sealant

‹› The sealing flange must be installed within 5 minutes after application of the sealant.

-

Install the (T10215/1) - 1 - onto the crankshaft - 3 -.

-

Slide the sealing flange with seal - 2 - carefully over the (T10215/1).

-

Install the sealing flange bolts.

-

Install the oil pan. Refer to => [ Oil Pan ] See: Engine Lubrication/Oil Pan/Service and Repair.

-

Install the vibration damper. Refer to => [ Vibration Damper ] See: Harmonic Balancer - Crankshaft Pulley/Service and Repair.

-

Install the ribbed belt. Refer to => [ Ribbed Belt ] See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Ribbed Belt.

Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Sealing Flange, Engine Front <--> [Front Engine Plate] > Component Information > Service and Repair > Page 1936

[PREV PAGE] [NEXT PAGE]