Passat Sedan V6-3.6L (BLV) (2008)
/Page-961007.png)
Repair/Cylinder Head Overview.
-
Tighten the 3 cylinder head cover bolts - arrows - to specifications, refer to - item 5 -=> [ Bolt ] See: Engine, Cooling and
Exhaust/Engine/Cylinder Head Assembly/Service and Repair/Cylinder Head Overview.
-
Install the vacuum pump, if present. Refer to => [ Mechanical Vacuum Pump ] See: Brakes and Traction Control/Power Brake Assist/Vacuum
Pump/Service and Repair/Mechanical Vacuum Pump.
The rest of the installation is basically a reverse of the removal sequence.
