Passat Sedan V6-3.6L (BLV) (2008)
/Page-216003.png)
-
Before installing control motor, check bearing of air flow door in intake housing and of toothed gear - C - (air flow door is opened, "fresh air
mode").
-
Connect Air Flow Door Motor (V71) to vehicle wiring harness (make sure connectors are allocated correctly).
-
Reach into intake opening for recirculating air mode and bring fresh/recirculating air door - A - into "fresh air mode" position (intake opening for
recirculating air mode is closed).
-
Insert motor - B - into mounts - C - in opposite direction of arrow and onto toothed gear - D -.
