Passat Sedan V6-3.6L (BLV) (2008)
Press in bearing on stop and until a pressing force of 20 kN has been obtained.
1. (VW 407)
2. Press piece (T10214/3)
3. Tube (T10214/2)
5. Tube (T10214/1)
Remove (T10267) from subframe and check seating of the pressed in bonded rubber bushing.
‹› The outer diameter - 1 - of both bonded rubber bushings must project up to 2 mm beyond edge in area of opening for pendulum support.