Passat Sedan V6-3.6L (BLV) (2008)
2. Thrust piece (T10214/3) without bolts
3. Bonded rubber bearing
4. Tube (T10214/2)
5. Tube (T10214/1)
6. (VW 401)
Press bonded rubber bushing - 1 - in until dimension - a - has been obtained.
Dimension - a - = 2 - 3 mm.
Align (T10214/2) on subframe with pressed in bonded rubber bushings. Edges of bonded rubber bushing inner core - 1 - must run on imaginary
line parallel to edge of (T10267) - 2 -.
Distance - a - must be identical at left and right to guarantee parallelism.
Subframe makes contact on smaller inner diameter of tube (T10244/3).