Passat Sedan V6-3.6L (BLV) (2008)
-
Remove bolt - 1 - or - 2 - on both sides.
‹› For the sake of a better illustration, only the left side of the vehicle is shown.
To locate subframe, (T10096) must be screwed in one after the other on both sides of the vehicle at positions - 1 - and - 2 -.
-
Location position of subframe with (T10096).
‹› (T10096) may only be tightened to a maximum of 20 Nm, since otherwise the threads of the locating bolts will be damaged.
-
Replace subframe bolts one after the other on both sides using (T10096) and tighten them to 20 Nm.