Volkswagen Workshop Service and Repair Manuals

• ‒ → Cut back remaining material on window flange with scraping blade V.A.G 1561/8, but do not remove completely.

Notes:

• ◆ Remaining material is required as a base for better adhesion of the new coat of adhesive sealing material to be applied. Keep dirt and grease off of adhesive surfaces.

Exception: If bonding is not performed immediately after cutting back, the remaining residual material must be activated with activator D 181 801 A1.

• ◆ If the window flange has been repaired or partially renewed, after painting, the area concerned must be cleaned and primed again.