- Running gear
- Body
- Engine, mechanics
- Vehicle electrics
- Power transmission
- Heating, ventilation, air conditioning
- Power unit
- Simos injection and ignition system
- Motronic injection and ignition system
- 4-Cyl. injection engine (2 valve, roller rocker finger), Mechanics
- Mono Motronic injection and ignition system
- Diesel injection and glow plug system
- 4-cyl. diesel engine, Mechanics
- 1AV fuel injection and ignition system (2-valve)
- 1AV fuel injection and ignition system (4-valve)
- 4CV fuel injection and ignition system
- 4AV injection and ignition system
- Motronic inj. and ignition system (2-valve, roller rocker finger)
- 4LV injection and ignition system
- 4-Cyl. injection engine (4 valve), Mechanics
- 4-Cyl. injection engine (4-valve, roller rocker arm), Mechanics
- 4-Cyl. injection engine (4 valve, roller rocker finger), Mechanics
- 4-cyl. injection engine (4-valve, roller rocker finger), Mechanics
- 3-cylinder diesel engine
- Direct injection and glow plug system with distributor pump as of 10.99
- Diesel direct injection and glow plug system up to 09.99
- Self diagnosis, V.A.G Inspection Service
- Self-diagnosis
- Fault memory
- Final control diagnosis
- Measured value blocks
- Safety precautions
- Read measured value block
- Evaluating measured value blocks, engine codes AHG, AKU
- Evaluating measured value blocks, engine code AGD
- Display group 000 at idling speed (engine warm, coolant temperature not below 80°C)
- Display group 001 at idling speed (engine warm, coolant temperature not below 80°C)
- Evaluation: Injected quantity display
- Evaluation: Modulating piston movement sender G149 voltage display
- Display group 002 at idling speed (engine warm, coolant temperature not below 80 °C)
- Evaluation: Accelerator pedal position display
- Evaluation: Operating condition display
- Display group 003 at idling speed (engine warm, coolant temperature not below 80 °C)
- Display group 004 at idling speed (engine warm, coolant temperature not below 80 °C)
- Evaluation: Commencement of injection (specified) display
- Evaluation: Commencement of injection (actual) display
- Evaluation: Commencement of injection valve duty cycle display
- Display group 006 with ignition switched on
- Evaluation: Brake pedal monitor display
- Evaluation: Cruise control system display
- Display group 007 with ignition switched on (engine cold and not running)
- Evaluation: Fuel temperature display
- Evaluation: Intake air temperature display
- Evaluation: Coolant temperature display
- Display group 013 at idling speed (engine warm, coolant temperature not below 80 °C)
- Evaluation: Idling speed smooth running control display
- Display group 000 at full throttle (road test in 3rd gear, coolant temperature not below 80 °C)
- Display group 004 at full throttle (road test in 3rd gear, coolant temperature not below 80 °C)
- Evaluation: Commencement of injection (actual) display
- Evaluation: Commencement of injection valve duty cycle display
- Display group 008 at full throttle (road test in 3rd gear, coolant temperature not below 80 °C)
- Evaluation: Injected quantity (driver's requirement) display
- Evaluation: Injected quantity limitation (torque map) display
- Evaluation: Injected quantity limitation (smoke map) display
- Display group 011 at full throttle (road test in 3rd gear, coolant temperature not below 80 °C)
- Fuel preparation system Diesel injection
- Ignition system, glow plug system
- 4-cylinder injection engine (2-valve), mechanics
- Heating, ventilation, air conditioning system