Note | t
| When installing an exchange cylinder head, all the contact surfaces between the support elements, roller rocker arms and the cams must be oiled before installing the camshaft housing. |
| t
| The plastic packing pieces for protecting the open valves must not be removed until immediately before fitting cylinder head. |
| t
| If the cylinder head is replaced, all the coolant in the system must also be renewed. |
| t
| All bearing and running surfaces must be oiled before assembly. |
| t
| Removing and installing intake manifold and injectors → Chapter. |
| Removing, installing and tensioning toothed belts → Chapter. |
| Checking semi-automatic toothed belt tensioning roller → Chapter. |
| Removing and installing camshaft housing → Chapter. |
| Removing and installing cylinder head → Chapter. |
|
|
|
