–
| First, place the Poly-V belt on the crankshaft pulley. Then,
place the belt on the tensioning element. |
Installation is performed in the reverse sequence to the removal. |
Note t
| Before installing the Poly-V belt, make sure all assemblies
(Generator (Alternator) -C-, air conditioner
compressor and power steering pump) are well installed. |
t
| While installing the Poly-V belt, observe the correct direction
of movement and seating of the belt on the pulley. |
When the job is finished, always: |
–
| Start the engine and check the belt spinning (movement). |
|
|
|