Up!
|
|
|
Note| Forms other than the cover shown here -4- may also be installed. |
| – | Remove plugs -4-. |
| – | Insert assembly tool -T10389- approx. 44 mm into the door behind locking hook -3- of the door handle bracket. |
| – | Pull assembly tool -T10389- approx. 5 mm backwards -arrow- until hook is detached. |
|
|
|
|
| – | Insert flat-bladed screwdriver -4- approx. 40 mm into door handle bracket until locking hook -3- is reached. |
| – | Press cover cap -1- onto door. |
| – | Push screwdriver approx. 5 mm into hole -arrow- until hook locks in place. |
| – | Insert plug -5-. |