Up!
|
| 1 - | Earth wire battery terminal clamp |
| q | Comply with the instructions regarding threaded connections of the battery terminals → Anchor |
| q | A battery monitoring control unit -J367- (battery sensor) is also fitted in vehicles with a start/stop system. |
| 2 - | Securing nut for earth wire battery terminal clamp |
| q | M6 |
| q | 6 Nm |
| 3 - | Earth wire cover |
| 4 - | E-box with holder |
| q | Removing and installing → Chapter |
| q | Specified torque for nut securing E-box to battery terminal clamp for positive cable: 6 Nm |
| 5 - | Positive wire battery terminal clamp |
| q | Specified torque for nut securing E-box to battery terminal clamp for positive cable: 6 Nm |
| 6 - | Securing nut for positive wire battery terminal clamp |
| q | Comply with the instructions regarding threaded connections of the battery terminals → Anchor |
| q | M6 |
| q | 6 Nm |
| 7 - | Clamping plate securing nut |
| q | M8 |
| q | 9 Nm |
| 8 - | Clamping plate |
| q | Observe assembly note |
| 9 - | Battery |
| q | In the case of vehicles with start/stop system, observe instructions for replacement of battery → Anchor. |
| q | Removing and installing → Chapter |
| 10 - | Nuts for securing battery carrier |
| q | M6 |
| q | 6 Nm |
| 11 - | Battery carrier |
| q | Removing and installing → Chapter |
| q | Nuts for securing battery carrier to body: 15 Nm |
| q | Bolts for securing bracket of engine control unit to battery carrier: 8 Nm |