240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Electronic Spark Control Module: Technical Service Bulletins
Electrical - New Cable Terminals as a Replacement Part
SECTION
3
GROUP
37
NO
207
DATE
May, 1996
RE:
New cable terminal as
a replacement part
200 1985-
REFERENCE:
TP 31486/1, SECTION 3 (35-38), LIGHTING, INSTRUMENTATION AND OTHER ELECTRICAL EQUIPMENT; 200 1975-19..
SERVICE BULLETIN 37-11 DATED 11/92
New cable terminal as a replacement part
The cable terminal P/N 1398314-3 is being withdrawn and replaced by cable terminal P/N 9441576-7.
In cars with a Chrysler ignition control module (1CM) (P/N 3517641) some contact pins have a sleeve. This sleeve must be removed if the cable terminal
on the ignition control module (1CM) cable harness is replaced.
Removing contact pin sleeve
Pull the sleeve on the contact pin to be connected to the new cable terminal type straight up.