240 L6-2383cc 2.4L DSL SOHC D24 FI (1982)
![background image](/volvo/240/l6-2383cc_2.4l_dsl_sohc_d24_fi/Page-392032.png)
1. Remove the solenoid.
2. Remove the relief valve cylinder to gain access to the control orifice.
3. Use compressed air to blow clean.
Solenoid Replacement
NOTE: Solenoid valve and control valve are integral and replaced as an assembly. Use 25 mm (1 in) crowfoot wrench (Volvo tool P/N 5172) for
removing and installing.
1. Disconnect wires at connectors. Attach crow-foot wrench. Use extension and wrench as appropriate. Remove solenoid.
2. Apply ATF oil to the new O-rings. Install solenoid. Use crow-foot wrench and torque wrench. Torque to 42-55 Nm (30-40 ft lb).
Relief Valve Checking/Replacing