740 L4-2320cc 2.3L DOHC B234F (Can) (1992)
Remove flame trap from T-piece.
Blow hoses and flame trap clean
Replace flame trap if blocked.
Check hose connection under intake manifold.
Install/reconnect:
- flame trap in T-piece
- hoses to T-piece
- tie around upper hose
- T-piece and hoses in oil trap
Connect hoses to intake manifold.
...............................................................................................................................................................................................................................................
Oil trap seals, replacement
Detach T-piece from oil trap
Disconnect hoses from intake manifold and oil trap.
Remove oil trap from cylinder block.
Remove intake manifold
Undo support at left-hand engine mounting.