740 L4-2320cc 2.3L DOHC B234F (Can) (1992)
Separate manifold from cylinder head.
Remove oil trap
Lift trap out of cylinder block.
Lift intake manifold when oil trap has been removed.
NOTE: Ensure that seals do not fall into crankcase.
Install/reconnect:
- 0-rings on oil trap (use new rings)
- oil trap in cylinder block
- gasket between intake manifold and cylinder head (use new gasket)
- intake manifold and support
- T-piece and hoses to oil trap
Reconnect hoses to intake manifold.
Check operation
Start engine.
Inspect for leakage.