Workshop Manuals Factory service & repair Volvo
01 0 Administration02 1 Standard parts, service and maintenance material03 2 Engine with mountings and equipment04 3 Electrical system05 4 Power transmission06 5 Brakes07 6 Suspension and steering08 7 Springs and wheels09 8 Body and interior10 9 Miscellaneous11 Referenced procedures
Volvo 850 Factory Service Manual (1992-1997)06 · 5 Brakes
06 · Brakes

Wheel brakes

Make
Volvo
Model
800 Series 850 Factory Service Manual
Year
1992–1997
Section
51 Wheel brake › Specifications, mechanical › Wheel brakes
5 BrakesWheel brakes

Wheel brakes

Specifications, mechanical

Applies to: 1992–1995

Front wheel brakes,
Brake discs,
TypeVentilated
Outside diameter280 mm (11")
Thickness, new26.0 mm (1.02")
Thickness, minimum23.0 mm (0.9")
Minimum recommended disc thickness when replacing brake pads23.8 mm (0.93")
Max. lateral run-out (mounted on wheel hub)0.040 mm (0.0016")
Brake caliper,
TypeSingle piston, sliding
Brake pads,
Thickness, new14.0 mm (0.55")
Thickness, minimum3.0 mm (0.12")
Note: Always use genuine Volvo brake pads as replacements.,
Rear wheel brakes,
Brake discs ,
TypeSolid
External diameter295 mm (11.6")
Thickness, new9.6 mm (0.38")
Thickness, minimum8.4 mm (0.33")
Minimum recommended disc thickness when replacing brake pads8.9 mm (0.35")
Max. lateral run-out (mounted on wheel hubs)0.080 mm (0.003")
Brake caliper,
TypeTwo piston, fixed
Brake pads,
Thickness, new9.4 mm (0.37")
Thickness, minimum2.0 mm (0.079")
Note: Always use genuine Volvo brake pads as replacements.,

Parts & tools for this job For 1992 Volvo 800 Series

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.