940 L4-2.3L SOHC VIN 88 B230F (1992)
Frame: Technical Service Bulletins
Body & Frame - Specification of Undersealed Surfaces
SECTION
8
GROUP
89
NO.
902
DATE
Aug. 1996
RE:
Specification of undersealed surfaces
900
REFERENCE: TP 8101201, SECTION 8 (81,84), SHEET METAL AND GLASS 700/900 1982-
Specification of undersealed surfaces
Background: Complaints are sometimes made about insufficient undersealing. Undersealing has been reduced from the following chassis no:
944: 145700-
945: 93400-
964: 36600-
965: 14700-
This Service Bulletin specifies the surfaces that are and are not undersealed.
Treated surfaces in the wheel arches The marked areas in the wheel arches should be undersealed, (the area around the spring strut).
Other components in the wheel arches are covered by the fender liners and need not be treated.
The illustration shows the front left-hand side wheel arch.
