940 L4-2.3L SOHC VIN 88 B230F (1992)
Headliner: Technical Service Bulletins
Interior - Modification For New Design Headliner
NUMBER
711
GROUP
85
MODEL
900
TITLE
MODIFICATION TO ROOF MEMBER
TO FIT NEW DESIGN OF HEADLINER
944, 964 -->1992 (PARTIAL)
MARKET
US and Canada
DATE
March 1993
REFERENCE:
TP 31127/1 (ENGLISH); 09/88; BODY FITTINGS, INTERIOR, CLIMATE UNITS
Modification of roof member to fit new design of headliner
A new design of headliner, which is attached at the rear by means of three clips, has been introduced in production models as a running change during
January '92. The earlier type of liner with two attachment clips at the rear will no longer be available as a replacement part.
When replacing the headliner, the rear roof member must be modified to install the center clip.
Note:
An additional clip must be ordered separate from the headliner.
This procedure is for chassis numbers up to and including:
944
074244
Factory code 1
075193
Factory code A
964
022601
Factory code 0
Remove headliner
Remove headliner as described in Service Manual.
Mark position of new center clip 300 mm (11-7/8") from center of outer attachment point and at same height.