940 L4-2.3L SOHC VIN 88 B230F (1992)
Note:
Place thick flat blade as protection between roof member and roof panel. Ensure that blade protects roof panel throughout operation.
WARNING:
Protective eyewear should be worn at all times.
Drill hole for clip and install new headliner
Protect interior from drill filings.
Use 7 mm (9/32") bit to drill hole as marked. Use drill stop according to illustration. Adjust hole to rectangular shape using triangular or square file.
Hole should be 8 mm (5/16") wide and 15 mm (19/32") high.
Note:
Do not exceed above dimensions, otherwise clip may not seat securely.
Rustproof hole with touch-up paint (or zinc primer).
Install new headliner as described in service manual.
WARRANTY STATEMENT:
Claims may be submitted under the New Car Limited Warranty when a manufacturing defect is present using claim type: 01.
Oper.No.
Labor Description
Time Allowance