940 L4-2.3L SOHC VIN 88 B230F (1992)
- Locate but do not tape in place the new heating pad on the cushion so that the upholstery seam matches up (See arrows in illustration
- Mark the location of thermostat and cable using a marking pen
- Cut out the cushion for the thermostat and cable (Refer to illustration)
A3
HEATING PAD, STANDARD RATING, INSTALLATION
Action:
- Place the heating pad in the correct position so that the heating pad and the cut out in the cushion for the upholstery and thermostat match
- Hold the heating pad in place and pull off the protective tape from one side of the heating pad, press fully into place.
- Pull off the other protective tapes and press fully to place.
A4
INSTALLATION OF CABLE, STANDARD RATING
Install:
- the cable from the heated cushion with standard rating located according to the diagram at the rear of the cushion.
- upholstery following the working method contained in the Service Manual.
A5