940 L4-2.3L SOHC VIN 88 B230F (1992)
Brake Rotor/Disc: Service Precautions
NOTE: When replacing a front brake disc, the position in which the disc is installed on the hub must be determined by measurement if the hub is not
marked. The purpose is to minimize the lateral runout of the disc (max. 0.06 mm = 0.0024 in) when the component is mounted in position. Gauge ring
9995419 must be used instead of the wheel when measuring the lateral runout. The ring should be mounted on the hub and the nuts tightened to 85 Nm
(63 ft. lbs.). If runout is excessive, a variation in thickness may develop as the disc becomes worn, leading to brake vibrations.
