Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


940 L4-2.3L SOHC VIN 88 B230F (1992)

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Intermediate Shaft Oil Seal <--> [Auxiliary Shaft Seal] > Component Information > Service and Repair > Page 3328

Page 5
background image

Install timing belt tensioner 

Install pulleys as applicable 

Position guide plates of camshaft pulley so that they incline outwards from pulley.

Position intermediate shaft pulley with marking (a cavity) outwards.

Hold pulley using tool 5034.

Torque to 50 Nm (36 ft lbs).

 
 
REPLACING CRANKSHAFT SEAL 

Remove oil seal 

Carefully pry loose seal with a screwdriver.  Contact face must not become damaged.

Clean and check contact faces 

for scoring and other damages.

Install new seal 

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Intermediate Shaft Oil Seal <--> [Auxiliary Shaft Seal] > Component Information > Service and Repair > Page 3328

[PREV PAGE] [NEXT PAGE]