Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


940 L4-2.3L SOHC VIN 88 B230F (1992)

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Intermediate Shaft Oil Seal <--> [Auxiliary Shaft Seal] > Component Information > Service and Repair > Page 3330

Page 7
background image

Tension Timing Belt: 

-

Install nut and washer for belt tensioner finger tight.

-

Pull timing belt to depress belt tensioner and remove locking drill.

-

Tensioner spring will now tension timing belt.

-

Tighten tensioner nut.

Install:
-

upper timing belt cover.

-

pulley.

-

drive belts loosely.

-

fan shroud.

-

clamp for preheating hose.

-

cooling fan.

Tension drive belts 

With correct tension, it should be possible to depress belt 510 mm (0.2-0.4 in) by thumb pressure.
Connect battery ground cable

Run engine warm and check/adjust:

-

ignition timing

-

CO

-

idle speed

-

for leakages

Switch off engine. 

Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Intermediate Shaft Oil Seal <--> [Auxiliary Shaft Seal] > Component Information > Service and Repair > Page 3330

[PREV PAGE] [NEXT PAGE]