Volvo Workshop Manuals
940 L4-2.3L SOHC VIN 88 B230F (1992)
Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Valve Cover Gasket > Component Information > Technical Service Bulletins > All Other Service Bulletins for Valve Cover Gasket: > 28205906 > Mar > 93 > Engine Controls - Driveability Problems > Page 3388
Press grease into connectors directly from tube.
Check that all spaces around connector terminals are filled.
Do not fill protective boots.
Ensure that all seals are in proper position prior to reconnection.
Start engine and leave it running, one minute, then check on-board diagnostic system to ensure that no DTCs have been stored.
Greasing of connectors
|[PREV PAGE] [NEXT PAGE]|