Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


940 L4-2.3L SOHC VIN 88 B230F (1992)

Engine, Cooling and Exhaust > Engine > Timing Components > Timing Belt > Component Information > Fundamentals and Basics > General Information > Page 3429

Page 3
background image

Remove the valve cover and inspect the valve clearances. A valve which is bent will be stuck in the open position or will have an excessively
larger clearance.

Perform a compression check or a cylinder leak down check. Cylinders with bent valves will have very low compression (<50.0 psi) and will not
hold pressure.

If valve damage is detected the cylinder head will have to be removed and the damaged valves replaced. Also inspect top of the pistons for
damage.

Engine, Cooling and Exhaust > Engine > Timing Components > Timing Belt > Component Information > Fundamentals and Basics > General Information > Page 3429

[PREV PAGE] [NEXT PAGE]