Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


940 L4-2.3L SOHC VIN 88 B230F (1992)

Engine, Cooling and Exhaust > Exhaust System > Catalytic Converter > Component Information > Technical Service Bulletins > Three Way Converter - Replacement of Pressed Bolts > Page 4079

Page 2
background image

 

Press out bolt using press tool 999 2862, or heat flange and tap out bolt.

INSTALLATION:
 NOTE: Installation will be facilitated by oiling bolt. 

With TWC removed from car 

Press in new bolt using press tool 999 2862 or using vice and counterhold (A). Ensure that bolt head is seated against flange following installation.

 

With TWC installed in car 

Press in new bolt using press tool 999 2862 and counterhold, or pull up with nut. Ensure that bolt head is seated against flange following installation.

WARRANTY STATEMENT:

Claims may be submitted under the New Car Limited Warranty when a manufacturing defect is present using claim type: 01.

Engine, Cooling and Exhaust > Exhaust System > Catalytic Converter > Component Information > Technical Service Bulletins > Three Way Converter - Replacement of Pressed Bolts > Page 4079

[PREV PAGE] [NEXT PAGE]