940 L4-2.3L SOHC VIN 88 B230F (1992)
ASSEMBLY
Install electromagnet.
Secure supply lead in clip.
Install screws (snap ring).
Press bearings into belt pulley.
Use press tool 999 5085 and counterhold 999 5142.
Install bearing one at a time.
Install snap ring.
Mount/install:
-
belt pulley on compressor. Use counterhold 999 5142. Tap pulley gently with plastic mallet.
-
inner snap ring
-
clutch. Align clutch with keyway opposite key. Tap down clutch with plastic mallet until first threads are visible. Use counterhold 999 5142
-
nut. Tighten to 38 Nm (28 ft lb).
-
compressor in car.