940 L4-2.3L SOHC VIN 88 B230F (1992)
Reinstall circlip.
Installing clutch plate
Install:
-
shims. Ensure that the shims are reinstalled on the shaft in the same order as they were removed.
-
clutch plate on compressor shaft, if necessary use puller 999 5598-1 and sleeve 999 5601-3.
-
screw and washer or nut.
Tighten to 15 Nm (11 ft. lbs).
Use counterhold 999 5596-5.
Check Clearance/Finishing