940 L4-2.3L SOHC VIN 88 B230F (1992)
Center Mounted Brake Lamp: Service and Repair
Glueing Holder For High-Level Brake Lights
-
Sandpaper fixing edge of holder until quite level (4).
-
Clean the relevant area of the window carefully and spray on primer.
-
Apply a very thin layer of adhesive to the holder fixing edge.
-
Manoever housing to holder on window.
-
Pry out housing slightly (2) and press the free holder right into the groove in the housing (3).
-
Align the unit and apply the holder firmly to the window (4). Press hard for at least one minute.