940 L4-2.3L SOHC VIN 88 B230F (1992)
Door Lamp: Service and Repair
Door Switch Replacement
-
Remove screw and withdraw switch.
-
Disconnect leads. Apply rust protector if necessary.
-
Fit new unit.
More modern door switches with drainage grooves have been introduced.
-
Modification of older switches:
Cover the lower hole with a piece of tape 19 x 19 mm (0.75 x 0.75 in). See illustration.
Make a 4 mm (0.16 in) hole in the lower part of the rubber protector. See illustration.
-
Reassemble in reverse order
-
Check that Interior lighting comes on.