Volvo Workshop Manuals
940 L4-2.3L SOHC VIN 88 B230F (1992)
Maintenance > Tune-up and Engine Performance Checks > Distributor, Ignition > Ignition Rotor > Component Information > Description and Operation > Page 2779
Ignition Rotor: Testing and Inspection
Check rotor for signs of corrosion or carbon tracking. Corrosion may be cleaned with 600 grit emery cloth. If carbon tracking exists, replace rotor.
Check rotor resistance. Resistance should be:
5 ± 1 K ohm.
If resistance is not within specifications, replace rotor.
|[PREV PAGE] [NEXT PAGE]|