Volvo Workshop Manuals
940 L4-2.3L SOHC VIN 88 B230F (1992)
Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Fuel Delivery and Air Induction > Throttle Position Switch > Component Information > Description and Operation > Page 4859
Throttle Position Switch: Adjustments
THROTTLE POSITION SWITCH ADJUSTMENT
Adjusting the Throttle Position Switch
Start by turning the Throttle Position (TP) Switch clockwise as shown by the arrow (A) until it stops.
Then turn the TP switch counter-clockwise as shown in the illustration by the arrow (B) until a "click" is heard, and then continue to turn until it
The throttle must not start to open, so hold it closed with a finger on the throttle disc. Keeping the TP switch in the position tighten the screws on
Open the throttle and check the gap between the throttle lever and adjustment screw with a feeler gauge.
With a 0.45 mm feeler gauge there should be no click from the idle switch when the throttle is closed.
With a 0.15 mm feeler gauge there should be a click from the idle switch when the throttle is closed.
Connect TP switch connector.
|[PREV PAGE] [NEXT PAGE]|