Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


940 L4-2.3L SOHC VIN 88 B230F (1992)

Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Crankshaft Position/Engine Speed Sensor <--> [Crankshaft Position Sensor] > Component Information > Technical Service Bulletins > RPM Sensor - Improved

Page 1
background image

Crankshaft Position/Engine Speed Sensor: Technical Service Bulletins
RPM Sensor - Improved

SECTION
2

GROUP
28

NO.
915

DATE 
July 1994

RE:
New RPM sensor

740/940 ALL

Fault tracing
Repairs
Maintenance

REFERENCE:
TP 32043/1, SECTION 2 (23, 28), MULTIPORT FUEL INJECTION (MFI) SYSTEM LH 2.4, 700/900 1989- TP 31903/1, SECTION 2 (23, 28),
FUEL SYSTEM REGINA 700 1988-

New RPM sensor

An improved flywheel RPM sensor, P/N 3547847-8, was introduced into production during week 48, 1993. The new sender is marked with a white ring,
10 mm from the connector, and has improved cable attachment using clips. When replacing the flywheel RPM sensor on cars made before week 48
1993, attachment, cleaning and greasing of the connector should be carried out according to this service bulletin.

Replacement of RPM sensor, method

Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Ignition System > Crankshaft Position/Engine Speed Sensor <--> [Crankshaft Position Sensor] > Component Information > Technical Service Bulletins > RPM Sensor - Improved

[PREV PAGE] [NEXT PAGE]