Volvo Workshop Manuals
940 L4-2.3L SOHC VIN 88 B230F (1992)
Relays and Modules > Relays and Modules - HVAC > Control Module HVAC > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Control Module HVAC: > 887955 > Sep > 97 > A/C - Unpleasent Odor On Startup > Page 431
Locate connector on cable between heater and dashboard (on side of centre console).
Separate connector and connect connector halves, from the new cable harness to the existing for each model year:
1991 model year:
Connect 4-pin connectors with 3 cables included in the kit cable harness, to existing connectors.
1992-94 model year (shown here):
Connect 2-pin connectors, included in the cable harness kit to existing connectors.
Connect the two open connectors to each other.
Remove the bottom connector from the blower resistor.
Connect 2-pin cable harness connectors between the detached connector and the bottom terminal on the blower resistor.
Installing control module from kit
|[PREV PAGE] [NEXT PAGE]|