Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


940 L4-2.3L SOHC VIN 88 B230F (1992)

Relays and Modules > Relays and Modules - HVAC > Control Module HVAC > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Control Module HVAC: > 887955 > Sep > 97 > A/C - Unpleasent Odor On Startup > Page 444

Page 21
background image

E5
Connection of yellow connector

-

Disconnect the yellow connector from the heater and connect the yellow connector from the new cable harness.

-

Connect the detached yellow connector to the yellow connector on the cable harness.

Installing control module from kit

E6
Connection and mounting of control module

-

Connect control module and cable harness connectors together.

-

Apply three sections of butyl tape to the control module.

-

Install control module to dashboard side section with butyl tape.

E7
Connection to ground plate
-

Connect the black-white cable included in the cable harness to the ground plate on the right side of the cowl

The ground plate is located behind the fuel control module.
The ground lead has a twin tab terminal for when there are no vacant spaces on the ground plate.

Relays and Modules > Relays and Modules - HVAC > Control Module HVAC > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Control Module HVAC: > 887955 > Sep > 97 > A/C - Unpleasent Odor On Startup > Page 444

[PREV PAGE] [NEXT PAGE]