Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


940 L4-2.3L SOHC VIN 88 B230F (1992)

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Service and Repair > Rear Sensor > Page 1470

Page 2
background image

AM5. Remove hub from spindle

Hold locating sleeve 999 5408 against end of spindle and pull off hub carefully. 
Press against inner bearing race as soon as clearance is available. Press against hub until locating sleeve bottoms, to prevent bearing races from
falling out.

AM6. Press off sensor wheel

Use drift 999 5351, spacer 999 5350 and counterhold 999 5340.

AM7. Press new sensor wheel onto hub 

Use drift 9995351 and counterhold 9995082.

Installation

AM8. Clean spindle thoroughly

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Service and Repair > Rear Sensor > Page 1470

[PREV PAGE] [NEXT PAGE]