Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


940 L4-2.3L SOHC VIN 88 B230F (1992)

Sensors and Switches > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Testing and Inspection > Fuel Level Sensor Check > Page 1841

Page 1
background image

Fuel Gauge Sender: Testing and Inspection
Sensor Ground Connection Check

1. Using an ohmmeter, measure resistance between sensor connector to harness (yellow/red), and ground.
2. Resistance should be approximately 0 ohms.
3. If resistance is correct, check sensor signal.
4. If resistance is incorrect, check for open circuits in wiring between connector (yellow/red), and 30-pole connector on instrument cluster (A4).

Sensors and Switches > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Testing and Inspection > Fuel Level Sensor Check > Page 1841

[PREV PAGE] [NEXT PAGE]