940 L4-2.3L SOHC VIN 88 B230F (1992)
Move gear selector lever to position P and turn ignition key to position I or II.
Press override button. Lever should now be movable from P position.
Return lever to position P and remove ignition key. Press override button. It should now be impossible to move lever from position P. Override function
should operate only when ignition key is in position I or II.
(A25)
Tighten side panel support
(A26)
Ensure that cable clip is secured to stud on propeller shaft tunnel
(A27)
Install relay/fuse unit mounting bracket
(A28)
Install: