volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Starter Motor|Removal and Installation|Page 9956 > < Starter Motor|Removal and Installation|Page 9954
Page 5
background image

The insulation should be ground to 0.4 mm (0.016 in) below surface of commutator. Use a special commutator grinder or a hacksaw blade. If necessary,
clean commutator with a fine-grade emery cloth.

J12 Drive

Inspect drive. Make sure that it runs correctly on thread. Check teeth. If damaged replace drive. (Also check starter motor ring gear.) Check that free
wheel locks in direction of rotation and disconnects in opposite direction.

J13 Bushings

Starter Motor|Removal and Installation|Page 9956 > < Starter Motor|Removal and Installation|Page 9954