940 L4-2.3L SOHC VIN 88 B230F (1992)
2. Install components in new valve body.
3. Gaskets:
CAUTION: Upper and lower gaskets are dissimilar. Ensure that each gasket is positioned and orientated correctly.
4. Place lower gasket and separator plate on top of lower valve body.
Check that balls, by-pass valve, spring and valve retainers are in position. Use new gasket, checking that it is identical to original. Attach separator
plate loosely with one screw.
5. Place upper gasket on top of separator plate. Use new gasket. Check that gasket is identical to original.
6. Check that all balls and valve retainers are in position in upper rear valve body.
