940 L4-2.3L SOHC VIN 88 B230F (1992)
13. Tighten Valve Body Screws. Torque: 5-6 Nm (3.5-4.5 ft.lb). Tighten from both sides.
14. Install gear selector valve.
15. Install locking spring and retainer. Tighten screws. Torque: 5-6 Nm (3.5-4.5 ft.lb).
16. Mount control system on gearbox. Use new sump gasket.
NOTE: If complete control system is to be replaced:
-
See "Application and ID" regarding identification of transmission.
-
See replacement schedule of "Control System" for correct part number of new control system. See: Specifications