940 L4-2.3L SOHC VIN 88 B230F (1992)
If early type one-way clutch is fitted, replace it with new type: Volvo P/N 1 209 484-3. Location of lock spring hole is new. See illustration.
NOTE: Proceed to operation 26. Operations 22 to 25 only refer to Type P.
Disassembling Rear Housing, Type P, Overdrive
23. Clamp overdrive rear housing in a vice protected by soft laws. Pry up oil slinger in two places to install puller P/N 5069. Place a socket on hub.
Use a screwdriver to pry up oil slinger.
24. Modification to tool P/N 5069. Replace center bolt with a 40 mm long bolt, threaded along entire length. P/N 998 9709.
