940 L4-2.3L SOHC VIN 88 B230F (1992)
25. Place drift P/N 5103 (group 21 tool) in bottom of housing. Use puller P/N 5069 to draw out oil slinger. Remove roller cage.
26. Remove drive flange nut.
-
Round drive flange: Use wrench P/N 5149 to hold.
-
Three-arm drive flange: Clamp drive flange in a vice.
NOTE: Use wrench P/N 5303 when removing drive flange from vehicle.
27. Withdraw drive flange. Use puller P/N 5304 if required.
