940 SE L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1991)
Lift and free wiring.
Replacement of central locking motor
Remove motor
Press lever bracket (1) upward while pressing central locking plunger (2) downward through oblong hole in bracket.
Next, press plunger guide (3) downward and release motor from mechanism.
Disconnect blue-red and red-white leads from 8-pole connector.
Install motor
Place blue-red lead in slot 7 and red-white lead in slot 6.
Place motor unit in housing. Press lever bracket upward, press central locking plunger downward and position guide in groove.
Note:
Ensure that latch is correctly positioned. Guide should be located in latch (4).
REPLACEMENT OF MICROSWITCH
Remove microswitch