940 SE L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1991)
Inspection
Inspecting Fuses and Seat Functions
Check that fuses with the correct amperage are installed for all seat functions.
The correct fuses are shown in decals or in the Owners Manual.
Check seat power functions.
Malfunctions that are determined to have been caused by chafed cables according to this bulletin must be replaced.
Other conditions are not covered by this campaign.
Removing Seats
Remove the front seats from the car according to the method shown in the Service Manual.
Note!
Before removing the seat wiring from the car's main wiring harness, the seat should be as far to the rear as possible and the cushion at the front and
rear edge as high as possible.
Remove the folding mechanism cover.
Inspecting Cables
Ensure wiring is in good condition and is correctly routed.
Excessively worn cables must be replaced.
The cable must be clamped adequately so that no new damage can occur.
Protection of Seat Backrest Wiring