940 SE L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1991)
Install edge trim on motor panel edges (A).
Install edge trim on spring assembly as protection for cables to the seat cushion heater (B).
Reinstall Seats
Note!
Check seal around seat rail index pin, (seat rail closest to the transmission tunnel). Damaged seal must be replaced, P/N 6812088-0.
Reinstall seats, tightening torques, seat rails to the floor is 45 Nm (33 ft. lbs).
Perform function test on the seats.